ocr: DUTE J HCI Juar Disconnect all external cables, floppy & SCSI internal cable, and SCSI power cable. Remove fan. Do this by squeezing the bottom sides of the fan together hard and sliding it upwards. Remove power supply. This is easy once you get the fan out. Spread the two plastic tabs at each side of the motherboard (where the notches are), and slide it forward (towards the floppy & hard drives). 2. - Desolder the 40.000 MHz oscillator. It helps (lots) to have a desoldering tool. It's also good to have a soldering iron that has a 3 prong plug, to prevent static. 3. Solder a socket (not an osc ...
/003.png?details){kind=small}
/003.png "Download"){kind=small}
/002.png){kind=link}
/004.png){kind=link}